manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 288

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-36

Cause.

ANSI Name is entered without specifying a required starting single quote or if 

guardian file name is entered after the first ANSI Name.

Effect.

The command fails.

Recovery.

Retry the command after adding the required missing single quote. If you 

have entered the Guardian name along with the ANSI Name in the same command, 
then retry the command by entering either the ANSI Name or the Guardian name.

Cause.

ANSI Name is entered without specifying a required ending single quote or the 

ANSI Name is not entered in the proper format.

Effect.

The command fails.

Recovery.

Retry the command after adding the required missing single quote or by 

correcting the ANSI Name.

Effect.

ANSI Name is entered with space character missing between the ANSI Name 

keyword and the SQL identifier.

Effect.

The command fails.

Recovery.

Retry the command after adding the required space character.

Cause.

ANSI Name is entered without specifying a required SQL identifier.

Effect.

The command fails. 

Recovery.

Retry the command after adding the required SQL identifier.

Cause.

ANSI Name is entered but SQL/MX is not installed on the system.

Effect.

The command fails.

Recovery.

Install SQL/MX on the system.

Cause.

Returned by FUP when SQL/MX ANSI Names APIs are not installed on the 

system.

Effect.

The command fails.

REQUIRED SINGLE QUOTE MISSING OR BAD ANSI NAME ENTERED

SPACE CHARACTER MISSING

SQL INDENTIFIER MISSING

SQL/MX IS NOT INSTALLED ON THE SYSTEM

SQL/MX ANSI NAMES NOT SUPPORTED

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands