manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 228

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-176

SET Parameters for All Structured Files

SET Parameters for All Structured Files

The 

create-param

 available depends on the type of file you want to create. These 

options are available for all structured files: 

BLOCK data-block-length

sets the data-block length. Specify 

data-block-length

 as an integer that is a 

power of 2 from 512 bytes through 4096 bytes (512, 1024, 2048, 4096).

The default 

data-block-length

 is 4096 bytes. Blocks should not be larger than 

extents. If this situation occurs, multiple extents are allocated every time a block is 
required.

When you are setting file-creation attributes, you can SET BLOCK 

data-block-length

 to any value within the valid range for this parameter, but 

FUP rounds it up to a DP2 block size.

You might need to decrease the number of 1 KB cache blocks and increase the 
number of 4 KB cache blocks (in the DP2 configuration) if there is significant use of 
the default block size (4096 bytes).

During the file-creation process, DP2 rounds up the extent size (to 2 pages or 
4,096 bytes) because the extent size of DP2 files must always be an integral 
multiple of the BUFFERSIZE (for unstructured files) or of the BLOCK size (for 
structured files).

REC record-length

sets the record length. Specify 

record-length

 as an integer in the range 1 

through:

The default setting for 

record-length

 is 80 bytes, and the maximum record 

length is reduced by one byte when data compression is used.

SET Parameters for Key-Sequenced Files

The 

create-param

 available depends on the type of file you want to create. These 

options are available for key-sequenced files:

[ NO ] COMPRESS

sets or clears the states of key compression in both index and data blocks. The 
default setting is NO COMPRESS. The key offset must be 0 for key compression 
in data blocks, and the maximum record size is reduced by one byte.

File Format

Maximum Value for Relative 
and Entry-Sequenced Files

Maximum Value for
Key-Sequenced Files

1

Blocksize - 24

Blocksize - 34

2

Blocksize - 48

Blocksize - 56

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands