manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 247

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-195

SYSTEM Guidelines

volume

names the new current default volume.

subvolume

names the new current default subvolume.

SYSTEM Guidelines

The initial SYSTEM setting is the node enabled when you start FUP.

You can use the SYSTEM command only to reference nodes that have a name; for 
example, a node that is part of a network.

Entering the SYSTEM command without 

node

 restores the default node name to 

the local node.

If you omit 

node

 parameter, FUP uses the local form for file-name expansion. 

Using the local form allows access to all volume and device names on the node.

When you supply 

node

 (even if the name of the local node is specified), FUP uses 

the network form for file-name expansion. Using the network form causes only 
volume or device names with six characters or fewer to be accessible.

The 

volume

 and 

subvolume

 parameters are optional. If you omit these 

parameters, FUP uses their current default values.

If 

node

 is an invalid node name, FUP displays an error message and does not 

change the node. However, FUP does not issue an error if 

volume

 (or its default 

value) does not exist on the new system.

FUP and the command interpreter keep separate defaults for node, volume, and 
subvolume. When you exit FUP, the command interpreter defaults are still the 
values that were enabled when you started FUP.

SYSTEM Examples

To set the \LONDON node as the current default for FUP and keep your current 
default volume and subvolume:

-SYSTEM \LONDON

To set the current FUP defaults to the PAID subvolume on the $BILLS volume of 
the NEWYORK node:

-SYSTEM \NEWYORK.$BILLS.PAID

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands