manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 256

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-4

Recovery.

Variable-length blocks must contain at least two bytes at the beginning of 

the block.

Cause.

An error occurred in the program logic.

Effect.

FUP ends abnormally.

Recovery.

Call your service provider and describe the circumstances under which the 

error occurred.

Cause.

The PART specification for CREATE or ALTER was wrong. For example, all 

partition numbers must be sequential, starting from 1. When this message appears 
after 

FUP LOAD... PARTOF...

, it indicates that FUP found the file that should have 

been the primary file, but it was not a partitioned file, or it was not the primary partition 
for the destination.

Effect.

The command fails.

Recovery.

In the first case, retry the command after specifying all partitions up to the 

maximum partition number. In the second case, correct either the destination file name 
or the PARTOF volume name.

Cause.

An attempt to load or copy a file failed because the record length specified for 

a variable-length record was not valid. For example, the record length was a negative 
number. This error can occur if the file to be loaded or copied was filled without 
specifying the VAROUT option of the COPY command. Alternatively, data in the file 
might have been corrupted.

Effect.

The COPY or LOAD command fails.

Recovery.

Retry the command after specifying the VAROUT option.

Cause.

Unique and nonunique alternate keys cannot reside in the same alternate-key 

file.

Effect.

The CREATE or ALTER command fails.

Recovery.

Retry the command after changing the alternate-key file.

Cause.

An audited file was the object of a CHECKSUM command.

BAD CASE NUMBER

BAD PARTITION PARAMETERS

BAD VARIABLE RECORD LENGTH

CANNOT MIX UNIQUE AND NON-UNIQUE KEYS WITHIN AN ALTERNATE KEY 
FILE

CAN'T CHECKSUM AUDITED FILES

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands