manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 269

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-17

Cause.

An attempt was made to duplicate a partition PARTONLY. FUP detected that 

the partition data would be reshuffled among the partitions.

Effect.

The command fails.

Recovery.

Reissue the command without the PARTONLY option, and convert the file 

as a whole.

Cause.

The OLD option of the DUP command was used.

Effect.

This is only a warning that any alternate-key files must be reloaded. 

Duplication of the primary file proceeds.

Recovery.

After the duplication completes, you need to update the alternate-key files 

using the LOADALTFILE command.

Cause.

A SUSPEND command issued against 

filename

 found no RELOAD 

operation for 

filename

.

Effect.

The command fails.

Recovery.

Check that you spelled 

filename

 correctly or that 

filename

 exists 

before retrying SUSPEND.

Cause.

A Safeguard protected file was duplicated, but the new file is not Safeguard 

protected.

Effect.

The file is duplicated; this is only a warning.

Recovery.

Use the Safeguard command interpreter to establish Safeguard protection 

for the file.

Cause.

No status information was found for a RELOAD operation, or the information 

found was invalid or inconsistent.

Effect.

The STATUS command fails.

Recovery.

Check that you spelled 

filename

 correctly or that 

filename

 exists 

before retrying STATUS.

NO CHANGE TO ALT KEY FILES

filename: NO RELOAD IN PROGRESS

filename:  NO SAFEGUARD PROTECTION

filename:  NO STATUS AVAILABLE

NO SUCH LINE

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands