manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 111

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-59

CREATE

CREATE

Creates a disk file with the current file-creation attributes defined by the SET 
command. To override the current file-creation attributes defined by the SET command, 
include 

create-param

 in the CREATE command.

filename

is the name of the file to be created. A partial file name is expanded using the 
current default names for system, volume, and subvolume.

create-param

overrides the current file-creation attribute setting that corresponds to this creation. 
The 

create-param

 used in a CREATE command does not change the file-

creation attributes defined by the SET command.

CREATE Guidelines

Extent size is rounded up at creation as necessary so it can hold an integral 
number of blocks.

For files on disk drives in a disk drive enclosure, there are additional 
considerations. See 

EXT { extent-size } { ( pri-extent-size , sec-extent-size ) }

 on 

page 2-173.

During the file-creation process, DP2 rounds up the extent size (to 2 pages or 
4,096 bytes) because the extent size of DP2 files must always be an integral 
multiple of the BUFFERSIZE (for unstructured files) or of the BLOCK size (for 
structured files).

To create an unstructured DP2 file with one-page extents, you must specify a 
BUFFERSIZE of 2048 bytes with either the FUP SET or FUP CREATE command.

To take advantage of the REFRESH, DCOMPRESS, and ICOMPRESS options of 
the CREATE command, you must create primary and alternate-key files separately. 
The CREATE command passes these attributes to the primary file only when it is 
created.

If you enter a CREATE, AUDIT command and the volume where the primary 
partition, secondary partitions, or alternate-key files reside is not audited, file-
system error 80 (invalid operation on audited file or nonaudited disk volume) is 
returned. If you create an alternate-key file with the NO UPDATE option (and the 
key file is not on an audited volume), the error does not occur.

CREATE filename [ , create-param ] ...

Note.

For descriptions of the 

create-param

 options, see 

SET

 on page 2-171.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands