manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 80

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-28

CONFIG[URE]

num SEVERE ERRORS

sets both the severe and nonsevere error counts to 

num

.

num WARNINGS

sets the number of warnings that FUP allows while executing FUP 
commands.

ABENDS [ ON | OFF ]

specifies whether FUP should terminate abnormally (ABEND) when it 
encounters an error and the allowed count for the error was exceeded. 
The default for ABENDS depends on:

The default when FUP is not used interactively is ON.

If FUP is used interactively (the IN file is a terminal), the ABENDS 
option is set to OFF.

If ABENDS is specified without ON or OFF, the ABENDS option is set 
to ON.

Errors from which the FUP process cannot recover always cause FUP 
to terminate abnormally.  

Note.

Table 2-1

 shows FUP responses to warnings and error types when 

ALLOW ABENDS is ON or OFF.

Table 2-1. Response to ALLOW ABENDS ON or OFF

Type of Error

ALLOW ABENDS OFF

ALLOW ABENDS ON

Warning

Warning allow count is 
decremented. 
If allow count > 0, the command 
continues. 
If allow count <= 0, the command 
fails. 

Warning allow count is 
decremented. 
If allow count > 0, the command 
continues. 
If allow count <= 0, FUP 
terminates abnormally.

Nonsevere error

Nonsevere error allow count is 
decremented. 
If allow count > 0, FUP continues 
with the current command on the 
next file in the file set.
If allow count <= 0, the command 
fails.

Nonsevere error allow count is 
decremented.
If allow count > 0, FUP continues 
with the current command on the 
next file in the file set.
If allow count <= 0, FUP 
terminates abnormally.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands