manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 104

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-52

COPY: Copy Form Guidelines

A COBOL program can read multireel tape files created by FUP COPY. 

FUP COPY uses sequential block buffering when accessing 

in-filename

. All 

record locks are ignored. 

When you enter a COPY command with no options, FUP opens 

in-filename

 

with the read-only access, protected exclusion mode, unless 

in-filename

 is a 

terminal. If 

in-filename

 is a terminal, FUP opens it with shared exclusion mode.

If you include the SHARE option in the command (and 

in-filename

 is a disk 

file), 

in-filename

 is opened with the shared exclusion mode.

FUP opens 

out-filename

 with the exclusive exclusion mode unless 

out-filename

 

is a terminal.

A physical read of 

in-filename

 reads one logical record. A logical record is 132 

bytes for unstructured files or files in the EDIT file format. A logical record is the 
length you specify for structured disk files and nondisk devices.

A physical write to 

out-filename

 writes one logical record. The actual number of 

bytes written is the number of bytes read.

Although you can specify a block size of as many as 32,767 bytes for the 
BLOCKIN and BLOCKOUT options, some peripheral devices have smaller 
maximum block sizes that must not be exceeded when you use the COPY 
command.

If you copy a file that contains data records and zero-length records (empty 
records) to a relative output file, all the records are written, including the zero-
length records, unless the input file is also a relative file.

If the input file is a relative file, the zero-length records are skipped unless you 
specify NO COMPACT. To transfer zero-length records from a relative file, include 
NO COMPACT in the COPY command.

For example, when you copy a relative file containing a combination of eight data 
records and two zero-length records, the record count of the output file is eight 
records instead of ten. So you lose zero-length records if you copy data with zero-
length records in and out of a relative file.

Note.

For more information, see these manuals:

COBOL85 for NonStop(TM) Himalaya Systems Manual

 (D-series RVUs)

COBOL85 for NonStop Systems Manual

 (G-series RVUs)

COBOL Manual for TNS/E Programs

 (H-series RVUs)

COBOL Manual for TNS and TNS/R Programs

 (H-Series RVUs) 

Note.

For more information, see the 

Enscribe Programmer’s Guide

.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands