manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 271

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-19

Recovery.

Retry the command after deleting the character that follows the 

continuation character.

Cause.

An operation was attempted in batch mode that can be performed only from a 

terminal.

Effect.

None.

Recovery.

Perform the operation in interactive mode from a terminal.

Cause.

A secondary partition was specified in a context where secondary partitions 

are not allowed.

Effect.

The command fails.

Recovery.

Check that the file name is for the intended file, or use the PARTONLY 

option if applicable to the command.

Cause.

When an ALTER command was entered, only the PARTONLY option was 

specified. No changes to the file were specified.

Effect.

None.

Recovery.

Retry the command, specifying the required changes.

Cause.

An attempt was made to duplicate a file using the OLD option with either the 

PART, ALTFILE, or EXT option. These options are mutually exclusive.

Effect.

Only the OLD option is used, and the others are ignored. This is only a 

warning.

Recovery.

To change something using PART, ALTFILE, or EXT, do not use the OLD 

option.

Cause.

A RESTARTABLE DUP operation was attempted, but more than one source 

file was specified.

Effect.

The operation terminates.

Recovery.

Specify only one source file when you perform the operation again.

NOT ALLOWED IN BATCH MODE

NOT PRIMARY PARTITION

NOTHING WAS SPECIFIED TO CHANGE

OLD OPTION USED:  IGNORING ANY PART, ALTFILE OR EXTENT 
OPTIONS

ONLY ONE SOURCE FILE ALLOWED WITH RESTARTABLE OPTION

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands