manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 122

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-70

DUP[LICATE] Guidelines for Safeguard Files

Transfer the CLEARONPURGE attribute (for more information, see 

SECURE

 

on page 2-166) to a local or remote target file. The target file does not need to 
be on the node where FUP is running. To restore the CLEARONPURGE 
attribute, use a SECURE command.

When DUP encounters a broken file, the broken flag is duplicated, and this 
warning message appears:

filename:  FILE IS BROKEN

When an SQL object file is duplicated, the expiration date (NOPURGEUNTIL) is 
not preserved. The expiration date is set by either the NOPURGEUNTIL option of 
the FUP ALTER command or by the SQLCI NOPURGEUNTIL attribute.

You can use the DUP command on queue files. For example, to increase the size 
of the queue files:

-DUP oldqueuefile, newqueuefile [EXT (pri-extent-size, sec-
extent-size)] [SAVEALL]

You cannot use DUP to increase MAXEXTENTS. To alter the MAXEXTENTS of a 
file, use the FUP 

ALTER

 command.

The maximum number of files in 

fileset-list

 that can be duplicated at a time is 

2,147,483,647.

The restart file created by H01 version of FUP cannot be used with H02 version of 
FUP and vice versa.

DUP[LICATE] Guidelines for Safeguard Files

To duplicate a Safeguard protected file, you must have read access to the input file 
(

from-fileset-list

) and create access to the destination volume and 

subvolume (

to-fileset

).

Unless you have create access (using Safeguard) to it, the target file is not created 
successfully. If you run a DUP command with the PURGE option but do not have 
create access to the target file, the original file is purged, and the target file is not 
created.

If you duplicate a Safeguard protected file, the new file is not Safeguard protected 
unless volume or subvolume protection exists on the target subvolume. To restore 
or set Safeguard protection, use the Safeguard command interpreter (SAFECOM).

Whenever you duplicate a Safeguard protected file (file-level protection), this 
warning message appears:

WARNING - filename: NO SAFEGUARD PROTECTION

If you duplicate a Safeguard protected file with the SAVEID or SAVEALL option, 
the owner of the old file (and the corresponding security of the file) is retained.

If you duplicate a Safeguard protected file without the SAVEID or SAVEALL option, 
you become the new owner of the file (and its security is your default).

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands