manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 112

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-60

CREATE Examples

If FUP terminates because an error occurs while CREATE is automatically creating 
alternate-key files, the primary-key file and any alternate-key files already created 
are not deleted. You must purge these files manually.

CREATE cannot create SQL files that are not SQL object files. You must use 
SQLCI CREATE instead.

To override the default SMF assignment on a CREATE command of a file on a 
logical volume, use the CREATE command with the PHYSVOL option.

All partitions of a file are created with the same format version. For files that are 
not sequenced, an independently created partition must have the same format as 
all other partitions of the file.

For an enhanced key-sequenced file, the SET PART command accepts a non-zero 

partial-key-value 

for the first secondary partition. However, a subsequent 

CREATE command by the user fails and the error FEINVKEY is returned.

CREATE Examples

To create a non-partitioned unstructured file on a disk drive in a disk drive 
enclosure:  

-SET TYPE U
-SET EXT (2,20)
-SET REC 80
-CREATE TEST 

To create a partitioned unstructured file where one or more partitions reside on a  
disk drive in a disk drive enclosure.

-SET TYPE U
-SET EXT (14,42)
-SET REC 80
-SET PART (1,$FIBRE,14,42)
-CREATE TESTPART

To create a key-sequenced file named MYFILE in the current default volume and 
subvolume with the file-creation attributes that are specified by the SET 
commands:

-SET TYPE K
-SET REC 80
-SET KEYLEN 8
-CREATE MYFILE

Note.

DP will round the extent sizes up to multiples of 14 so the actual extent information 

will be ext (14,28), not ext (2,20) as specified.

Note.

DP2 requires that the 

pri-extent-size

 and 

sec-extent-size

 of partitioned 

unstructured files explicitly be multiples of 14.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands