manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 276

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-24

Cause.

An attempt was made to use the REELS parameter when 

in-file

 for the 

operation was a TAPE DEFINE name with LABELS set to label processing.

Effect.

The command fails.

Recovery.

Use the REELS and VOLUME TAPE DEFINE attributes with multiple 

labeled tapes.

Cause.

A RELOAD command failed before completion.

Effect.

The STATUS command terminates.

Recovery.

For corrective action for the file-system error number indicated by 

nnn

, see 

the 

Guardian Procedure Errors and Messages Manual

.

Cause.

A RELOAD command was issued against 

filename

 while another RELOAD 

command was already in progress for that file.

Effect.

The command fails.

Recovery.

Informational message only; no corrective action is needed.

Cause.

A file-system error was encountered while attempting to rename the indicated 

file.

Effect.

The command fails.

Recovery.

For corrective action for the file-system error number indicated by 

nnn

, see 

the 

Guardian Procedure Errors and Messages Manual

.

Cause.

FUP was expecting a delimiter but did not find it or an ANSI Name is entered 

without specifying a required comma, open parenthesis, or closing parenthesis.

Effect.

The command fails.

Recovery.

Retry the command after adding the delimiter.

Cause.

A RESTART operation was attempted, but the restart file did not have the 

correct file code. The restart file was not created by FUP as part of a legitimate 
RESTARTABLE DUP operation.

filename: RELOAD ABENDED WITH ERROR nnn

filename: RELOAD ALREADY IN PROGRESS

filename : RENAME ERR : nnn

REQUIRED DELIMITER MISSING

RESTART FILE MUST HAVE FILECODE 855

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands