manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 74

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-22

BUILDKEYRECORDS Guidelines

If 

out-filename

 (the destination file) contains existing data, it is never 

overwritten during a BUILDKEYRECORDS operation.

key-specifier-list

names one or more alternate-key fields of the primary file whose corresponding 
alternate-key records are to be generated.

key-specifier

is a 2-byte value that identifies the alternate-key field. Specify it as a one or 
two-character string in quotation marks:

"[c1]c2"

Or as an integer from -32,768 through 32,767:

{ -32,768 : 32,767 }

You can use any characters for 

key-specifier

 except zero. If you omit 

c1

, 

then 

c1

 is treated as a zero.

out-option

specifies the format and control of 

out-filename

. 

out-option

 is any one of:

BLOCKOUT out-block-length
DENSITYOUT density
EBCDICOUT
PAD [ pad-character ]
RECOUT out-record-length
[ NO ] REWINDOUT
SKIPOUT num-eofs
TAPEMODE mode
[ NO ] UNLOADOUT      
XLATE [ xlate-table-name ]
XLATEIN [ xlate-table-name ]
XLATEOUT [ xlate-table-name ]

BUILDKEYRECORDS Guidelines

BUILDKEYRECORDS causes the primary file to be read sequentially according to 
its primary-key field.

For each record read from the primary file, BUILDKEYRECORDS generates one 
or more alternate-key records (corresponding to the number of key specifiers that 
are named) and writes them to the out file.

If you name more than one key specifier, BUILDKEYRECORDS generates the 
corresponding alternate-key file records in the order of the ASCII collating 
sequence for the key specifiers.

Note.

For a complete description of these options, see 

out-option on page 2-45

.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands