manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 272

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-20

Cause.

A file-system error was encountered while attempting to open the indicated 

file.

Effect.

The command fails.

Recovery.

For corrective action for the file-system error number indicated by 

nnn

, see 

the 

Guardian Procedure Errors and Messages Manual

.

Cause.

An SQL object was specified in a command that cannot operate on these 

objects.

Effect.

The command fails.

Recovery.

If you intended to specify another type of file, retry the command after 

correcting the file specification. To perform operations on SQL objects, use the SQL 
Conversational Interface (SQLCI) for SQL/MP files and MXCI for SQL/MX files.

Cause.

A CHECKSUM command specified an SQL view.

Effect.

The operation is not performed on the view but will be performed on the next 

object or file in the specified file set.

Recovery.

If you intended to specify another type of file, retry the command after 

correcting the file specification.

Cause.

An SQL object was specified as a list file.

Effect.

The command operation terminates.

Recovery.

Retry the command, specifying a valid list file.

Cause.

You specified a file on optical disk as the OUT file for the RUN FUP command 

(for example, RUN FUP/OUT $OPT.X.Y/) or as the OUT file for the FUP commands 
HELP, INFO, FILES, SUBVOLS, LISTOPENS, or SHOW (for example, HELP / OUT 
$OPT.X.Y/ ALL).

Effect.

The command fails.

Recovery.

Retry the command with an OUT file residing on magnetic disk.

filename : OPEN ERR : nnn

OPERATION NOT ALLOWED ON SQL OBJECT

OPERATION NOT ALLOWED ON VIEW

OUT FILE CAN'T BE AN SQL OBJECT

filename: OUT FILE CAN'T BE ON OPTICAL DISK.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands