manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 295

FUP Command Summary

File Utility Program (FUP) Reference Manual—523323-014

B-3

DEALLOCATE

Deallocates any extents past the end-of-file extent for one or 
more disk files.

DUP[LICATE]

Makes a copy of one or more disk files. There are special 
considerations for duplicating Safeguard protected files. Refer to 
the syntax and guidelines for this command.

LOAD

Loads data into a structured disk file without affecting any 
associated alternate-key files. For key-sequenced files, the input 
data can be unsorted or sorted. Unless you specify sorted, the 
LOAD command assumes that data is unsorted and sorts the 
input records before loading the file. For key-sequenced files, you 
can also specify slack space for future insertions to the file.

LOADALTFILE

Loads an alternate-key file with the alternate-key records of a 
specified structured disk file. You can specify slack space for 
future insertions.

PURGE 

Purges one or more disk files.

PURGEDATA 

Purges data from one or more disk files.

RELOAD

Reorganizes a key-sequenced file while permitting full access to 
it.

RELOCATE

Moves files on SMF virtual disks from one physical volume to 
another (within a storage pool).

RENAME

Renames one or more disk files.

RESET

Changes one or more file-creation parameter values to the default 
settings.

RESTART

Restarts a RESTARTABLE DUP operation.

SET

Sets one or more file-creation parameter values for subsequent 
file creations. To set Safeguard parameter values, you must use 
SAFECOM instead of FUP.

SHOW 

Displays the current settings of the file-creation parameter values.

SUSPEND

Temporarily stops a RELOAD operation.

Table B-4. FUP File Management Commands

(page 2 of 2)

Command Function

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands