manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 241

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-189

SHOW Guidelines

SHOW Guidelines

You cannot use 

show-opts

 and 

configure-opts

 in the same command. You 

must use separate SHOW commands.

If you issue the SHOW command with a 

create-spec

 that is not currently set (or 

is not applicable to the current value of TYPE), FUP returns only a prompt.

The SHOW display might list an EXT size that differs by one page from what might 
actually be created. This situation occurs because FUP rounds extent sizes up (if 
necessary). 

Use the DISPLAYBITS option (from the CONFIGURE command) with SHOW for a 
file that has alternate keys containing 8-bit characters in the partial key-value field. 
For more information about the DISPLAYBITS option, see 

CONFIG[URE]

 on 

page 2-26.

You can set the extent size as the number of records in each extent. SHOW 
displays the extent size in that form. For example, suppose you enter:

-SET EXT (100 RECS, 10)

The SHOW display then includes:

EXT ( 100 RECS, 10 PAGES )

Use the SHOW command with the PHYSVOL option to display any SMF settings 
for the file-creation attributes.

SHOW Examples

This example assumes you enter FUP SHOW when the defaults are enabled for all 
file-creation attributes, causing this information to be displayed:

TYPE U
FORMAT 1
EXT ( 1 PAGES, 1 PAGES )
MAXEXTENTS 16
BUFFERSIZE 4096

To use the SHOW command to display the result of the SET commands used to 
assign specific file-creation attributes:

> FUP
-SET TYPE K
-SET KEYLEN 2
-SET ALTKEY ("aa",FILE 0,KEYLEN 2,KEYOFF 0,INSERTIONORDER)
-SET ALTFILE (0, $DATAA.DCDTEST.ALT0)
-SHOW
TYPE K
EXT ( 1 PAGES, 1 PAGES )
FORMAT 1

Note.

For more information about the EXT parameter, see 

SET

 on page 2-171.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands