manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 277

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-25

Effect.

The RESTART operation terminates.

Recovery.

When you retry the operation, use a valid restart file that has file code 855 

or perform an ordinary DUP operation.

Cause.

For a RESTARTABLE DUP operation or a RESTART operation, the restart file 

was named explicitly or implicitly (that is, as a default) on an optical disk volume.

Effect.

The operation terminates.

Recovery.

Do not specify a restart file on an optical disk when you perform the 

operation again.

Cause.

A RESTART operation was attempted, but the restart file does not contain 

valid information.

Effect.

The RESTART operation terminates.

Recovery.

Perform an ordinary DUP operation.

Cause.

The transfer of a file’s SECURITY attribute failed during a duplicate operation 

with the SAVEALL or SAVEID option to a remote node.

Effect.

The SECURITY attribute is not preserved. 

Recovery.

Use the SECURE command to change the security. Remote logon might 

be required. 

Cause.

A file-system error was encountered while attempting a SETMODE command.

Effect.

The requested command fails.

Recovery.

For corrective action for the file-system error indicated by 

nnn

, see the 

Guardian Procedure Errors and Messages Manual

.

Cause.

An attempt was made to use the SKIPIN parameter when the 

in-file

 for the 

operation was a TAPE DEFINE name with LABELS set to label processing.

Effect.

The command fails.

RESTART FILE NOT ALLOWED ON OPTICAL DISK

RESTART INFORMATION INVALID

SECURITY NOT PRESERVED AT DESTINATION

filename: SETMODE ERR nnn

SKIPIN PARAMETER NOT ALLOWED FOR LABELED TAPES

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands