manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 251

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-199

VOLUME Guidelines

node 

sets the current default node for FUP. You can set the default node only in a 
named node; for example, a node that is part of a network.

volume

sets the current default volume name for FUP operations.

subvol

sets the current default subvolume name for FUP operations.

VOLUME Guidelines

Typing the VOLUME command without a parameter restores the defaults that were 
enabled when you started FUP, including the original node.

When you supply 

node

 (even if you specify the name of the local node), FUP uses 

the network form for file-name expansion. Using the network form causes only 
volume or device names with six characters or fewer to be accessible.

You cannot specify a new current default volume name that has more than six 
characters after the dollar sign ($) on a remote node.

node

 and 

subvolume

 are optional. If you omit these parameters, FUP uses their 

current default values.

If 

node

 is an invalid node name, FUP displays an error message and does not 

change the node. However, FUP does not issue an error if 

volume

 (or its default 

value) does not exist on the new system.

FUP and the command interpreter keep separate defaults for node, volume, and 
subvolume. When you exit FUP, the command interpreter defaults are still the 
values that were enabled when you started FUP.

VOLUME Examples

To set the current default subvolume for FUP to SUBVOL1 but not change the 
current default volume or node:

-VOLUME SUBVOL1

To set the current default volume for FUP to $BOOKS3 but not change the current 
default subvolume or node:

-VOLUME $BOOKS3

To set the current default node, volume, and subvolume for FUP operations to 
\ITALY, $MILANO, and ARTWORK:

-VOLUME \ITALY.$MILANO.ARTWORK

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands