manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 35

FUP Overview

File Utility Program (FUP) Reference Manual—523323-014

1-11

Qualified File Sets

You cannot use more than eight characters (including wild-card characters) in any 
portion of the file name (volume, subvolume, or file identifier).

The only valid use of the wild-card option in a destination file-set specification is a 
single asterisk (*) in the subvolume or file ID position. The DUP MYFILE, * 
command is valid, but the DUP MYFILE, MY* command is not.

Wild-Card Examples

To specify the file MYFILE on the current FUP default volume and subvolume:

MYFILE

To specify all the file IDs that begin with MY on the current default volume and 
subvolume:

MY*

To specify all the file IDs that begin with MY, are followed by one character, and 
end with ILE on the current default volume and subvolume:

MY?ILE

To specify all the files in the subvolume MYSVOL on the current default volume:

MYSVOL.*

To specify all the files in all the subvolumes on the volume $VOL1:

$VOL1.*.*

To specify all the files in all the subvolumes on the current default volume:

*.*

To specify all the files in the subvolume MYTOWN on the volume $BRDWAY on 
the \NY node:

\NY.$BRDWAY.MYTOWN.*

Qualified File Sets

A file set with 

qualified-expr

 is called a qualified file set. A qualified file set 

specifies an additional set of restrictions to a file set. It defines a subset (to 

fileset

) 

and extends the power of the wild-card option in file names by including arbitrary 
qualifications for file attributes. 

Note.

File sets can use qualified file-set syntax except where explicitly prohibited in the 

descriptions of each command in 

Section 2, FUP Commands

.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands