manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 123

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-71

DUP[LICATE] Examples

DUP command supports queue files. For example:

-DUP oldqueuefile, newqueuefile [EXT (pri-extent-size, sec-
extent-size)] [SAVEALL]

MAXEXTENTS cannot be increased by DUP. Use FUP ALTER to alter the 
MAXEXTENTS of the file.

DUP[LICATE] Examples

To duplicate all the files in the current default subvolume (and in the MYSVOL 
subvolume) and place copies of the files (using the same file names) in the 
NEWSVOL subvolume:

-DUP (MYSVOL.*, *), NEWSVOL.*

To let the DUP operation on the source file (FILE1) be restarted if the initial DUP 
operation does not complete successfully:

-DUP FILE1, FILE2, RESTARTABLE

If the initial DUP operation does not complete successfully, restart the previous 
command:

-RESTART

To duplicate a file in a different volume and rename the first alternate-key file (file 
0) of the destination file $VOL2.RECD.ALTFILE:

-DUP $VOL1.RECD.DATA, $VOL2.*.* , ALTFILE (0, $VOL2.RECD.&
-ALTFILE)

To duplicate a partitioned file in a different node and rename the secondary 
partition of the destination file \TWO.$VOL2.SUB1.PARTFILE:

-DUP $VOL1.SUB1.PARTFILE, \TWO.$VOL1.*.*, &
-PART (1, \TWO.$VOL2)

When you duplicate a partitioned file (in a different node or volume), to duplicate a 
secondary partition from a volume that does not exist on the destination node, you 
must include the PART option. To duplicate the secondary partitions, use these 
commands (on separate command lines):

-DUP $VOL3.SUB1.PARTFILE, \TWO.$VOL2.*.*, PARTONLY
-ALTER \TWO.$VOL1.SUB1.PARTFILE, PART (1, \TWO.$VOL2)

The DUP command duplicates only the secondary partition of PARTFILE (to 
$VOL2 on node \TWO) because the PARTONLY option is specified.

ALTER changes the primary partition for the file on \TWO to point to the secondary 
partition that was duplicated using PARTONLY in the first command.

To duplicate all files on the current subvolume that end in FILE:

-DUP *FILE, NEWSVOL.*

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands