manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 260

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-8

Recovery.

Retry the LISTLOCKS operation.

Cause.

The TAPEMODE parameter was used for a tape drive that does not support 

the setting.

Effect.

The COPY or BUILDKEYRECORDS command continues without trying to set 

the tape mode.

Recovery.

Informational message only; no corrective action is needed.

Cause.

A DENSITYOUT parameter was specified for a tape drive that does not 

support density selection, or the DENSITYOUT parameter was specified when the tape 
was not at the beginning.

Effect.

The COPY or BUILDKEYRECORDS command continues without trying to set 

the density.

Recovery.

Informational message only; no corrective action is needed if the tape drive 

was at the correct density.

Cause.

The same volume was specified for more than one partition of a partitioned 

file.

Effect.

The CREATE, ALTER, or DUP command fails.

Recovery.

Each partition of a partitioned file must reside on a separate disk volume.

Cause.

An error occurred while the system was reading an EDIT file (READEDIT); it 

was probably a file-format error.

Effect.

The command fails.

Recovery.

For corrective action, see the 

Guardian Procedure Errors and Messages 

Manual

.

Cause.

A file contained empty records.

DRIVE DOES NOT SUPPORT TAPEMODE SELECTION

DRIVE DOES NOT SUPPORT THIS DENSITY SELECTION OR CAN ONLY 
CHANGE DENSITY AT BOT

DUPLICATE SECONDARY PARTITION VOLUME NAME

EDITREAD ERROR

source-file :  EMPTY RECORD FOUND AND NOT TRANSFERRED

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands