manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 185

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-133

LOAD

KEY { record-spec | key-value }

specifies the primary-key value for the starting record of a disk file. FUP begins 
reading the input file at the record you name with KEY.

Specify 

record-spec

 as an integer in the range 0 through 

(512000000 * 2,048) -1.

Give the starting relative byte address for 

record-spec

 (for unstructured 

files).

Give the starting record number for 

record-spec

 (for relative files).

Give 

ordinal-record-num

 for 

record-spec

 (for entry-sequenced 

files).

Use 

key-value

 to indicate the approximate position of the starting record for 

key-sequenced files. Specify 

key-value

 as either 

string

 or:

"[" { string } [ , string ] ... "]"
    { 0:255  } [ , 0:255  ]

You can specify a list of strings with each string enclosed by quotation 
marks or integers representing byte values in the range 0 through 255. You 
must enclose the list of strings and integers (if specified) in square 
brackets. 

For example, specify a key value as the ASCII string “T905”, followed by a 
word containing the integer value zero, and a word containing the integer 
value nine:

[ "T905", 0, 0, 0, 9 ]

key-specifier

is a one-character or two-character string (specified inside quotation marks) 
specifying the alternate key to be used for positioning purposes.

ALTKEY key-value

specifies the alternate key of the starting record for disk files. FUP begins 
reading the input file at the specified record. Specify 

key-value

 for key-

sequenced files according to the description of 

key-value

 in 

KEY { record-

spec | key-value }

.

Note.

The brackets in 

key-value

 syntax are enclosed in quotation marks to 

indicate that they are part of the parameter—and not to indicate that the 
parameter is optional. Do not include the quotation marks when you type the 
brackets.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands