manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 317

Glossary

File Utility Program (FUP) Reference Manual—523323-014

Glossary-7

structured query language conversational interface

(SQLCI)

structured query language conversational interface (SQLCI).

A line-oriented terminal 

interface that enables a user to enter SQL commands, format and run reports, and 
operate database utilities.

structured query language (SQL) object program.

The object file containing the set of 

executable machine language instructions produced from a host language source 
program with embedded SQL statements.

Subsystem Programmatic Interface (SPI).

A common, message-based interface that can 

be used to build and decode messages used for communication between requesters 
and servers (such as in a management application). It includes procedures to build and 
decode specially formatted messages; definition files in C, TAL, COBOL, and TACL for 
inclusion in programs, macros, and routines using the interface procedures; and 
definition files in DDL for programmers writing their own subsystems.

subvolume.

A part of a fully qualified file name. A subvolume is a named logical area on a 

disk where users can store files that are usually related to one another. Any user can 
create a subvolume by creating a file and naming the new subvolume as part of the file 
specifier. A subvolume ceases to exist when the last file in the subvolume is purged. A 
subvolume name consists of one to eight alphanumeric characters, the first of which 
must be alphabetic.

super ID.

A privileged user who can read, write, execute, and purge all files on the system. 

The super ID is usually a member of a system-supervisor group. The super ID has the 
user ID 255,255.

timestamp.

An identifier that indicates when a file was created or modified.

HP NonStop Transaction Management Facility (TMF).

A product that provides 

transaction protection and database consistency in demanding online transaction 
processing (OLTP) and decision-support environments. It gives full protection to 
transactions that access distributed SQL and Enscribe databases, as well as recovery 
capabilities for transactions, online disk volumes, and entire databases. To furnish this 
service, TMF manages database transactions, keeps track of database activity through 
audit trails, and provides database recovery methods.

unstructured file.

An Enscribe file type on a NonStop system that is essentially a byte 

array on disk that starts at byte address 0 and continues sequentially upward through 
whatever byte address is identified by the end of file (EOF).

VDP.

Abbreviation for virtual disk process.

virtual disk process (VDP).

The SMF process that implements location-independent 

naming. This is a process pair that is treated like a physical disk process from an 
application viewpoint. Also known as virtual volume process.

virtual volume.

A process name used instead of a physical volume name to provide 

location-independent naming.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands