manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 284

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-32

Recovery.

Check that what you are trying can be done using FUP. If it can, retry the 

command after correcting any errors in typing.

Cause.

An attempt was made to use a function that is not available.

Effect.

The request is not executed.

Recovery.

This message should never appear. If it does, contact your service 

provider.

Cause.

A quoted string was not terminated with a closing quote.

Effect.

The command fails.

Recovery.

Retry the command after closing the quoted string.

Cause.

An attempt was made either to duplicate a partition, PARTONLY, by using the 

EXT or PART option to specify the extent sizes, or to alter the extent sizes of a 
secondary partition in the file label of the primary partition of a DP2 key-sequenced file.

Effect.

The ALTER finishes; this is only a warning.

Recovery.

Check that the extent sizes in the file label of the primary partition reflect 

the actual extent sizes of the secondary partitions.

Cause.

The device specified in a LISTOPENS command does not return open 

information.

Effect.

The command fails.

Recovery.

For information on correcting the indicated file-system error number, see 

the 

Guardian Procedure Errors and Messages Manual

.

Cause.

An error occurred while writing an EDIT file (WRITEEDIT); it was probably a 

file-format error.

Effect.

The command fails.

UNIMPLEMENTED FUNCTION

UNTERMINATED STRING

USING SPECIFIED EXTENT SIZES:  USER MUST ENSURE CONSISTENT 
PARTITIONS

dev name: WILL NOT RETURN OPEN INFORMATION: ERR nnn

WRITEEDIT ERROR

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands