manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 278

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-26

Recovery.

Use the FILESEQ TAPE DEFINE attribute to skip files on a labeled tape.

Cause.

An attempt was made to use the SKIPOUT parameter when the 

out-file

 for 

the operation was a TAPE DEFINE name with LABELS set to label processing.

Effect.

The command fails.

Recovery.

Use the FILESEQ TAPE DEFINE attribute to skip files on a labeled tape.

Cause.

The indicated error or errors were reported by a SORT interface routine during 

execution of a LOAD, LOADALTFILE, or LISTOPENS command. 

Effect.

The LOAD, LOADALTFILE, or LISTOPENS command fails.

Recovery.

A SORT error occurred in the specified phase. Four different types of 

errors are possible. FILE ERR is a standard file-system error. NEWPROCESS ERR 
includes the process creation error number (

n

) and additional process creation error 

information (

%nn

). INTERNAL ERR is a SORT internal error. Correct the error and retry 

the command.

Cause.

A RESTART operation was attempted, but the source file was modified since 

the previous attempt to use DUP.

Effect.

The RESTART operation terminates.

Recovery.

Perform an ordinary DUP operation.

Cause.

An internal error occurred in the space allocation logic of FUP.

Effect.

FUP ends abnormally.

Recovery.

Restart FUP and retry the command. If the error occurs again, call your 

service provider.

Cause.

The Subsystem Programmatic Interface (SPI) returned an error to a RELOAD, 

STATUS, or SUSPEND command.

Effect.

The command fails.

SKIPOUT PARAMETER NOT ALLOWED FOR LABELED TAPES

{ SORTRECEIVE | SORTSEND | SORTSTART | SORTMERGEFINISH |
  SORTMERGERECEIVE | SORTMERGESEND | SORTMERGESTART         }
[ FILE ERR nn, | NEWPROCESS ERR n %nn, | INTERNAL ERR nn, ]
[ [ SORT FILE nn, ] SORT ERROR n ]

SOURCE FILE HAS CHANGED

SPACE ALLOCATION ERROR

SPI ERROR: error

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands