manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 257

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-5

Effect.

The command is not performed on the file.

Recovery.

Turn off auditing if possible. This command cannot be performed on 

audited files.

Cause.

A TAPE DEFINE was specified with USE set to EXTEND, but the DEFINE 

name was specified as an input file in either a FUP COPY or LOAD command.

Effect.

The command fails.

Recovery.

Modify the DEFINE or command parameters and retry the command.

Cause.

A TAPE DEFINE was specified with USE set to OUT, but the DEFINE name 

was specified as an input file in either a FUP COPY or LOAD command.

Effect.

The command fails.

Recovery.

Modify the DEFINE or command parameters and retry the command.

Cause.

A TAPE DEFINE was specified with USE set to IN, but the DEFINE name was 

specified as an output file in either a FUP COPY or BUILDKEYRECORDS command.

Effect.

The command fails.

Recovery.

Modify the DEFINE or command parameters and retry the command.

Cause.

An optical disk file was specified in a command that cannot operate on optical 

disk files.

Effect.

The command fails.

Recovery.

If you intended to specify another type of file, retry the command after 

correcting the file specification.

Cause.

An attempt was made to copy or load a nonrelative file using the COMPACT 

option.

Effect.

Execution of the command proceeds.

CAN'T OPEN TAPE FILE FOR READ ACCESS IF DEFINE VALUE FOR USE 
IS EXTEND

CAN'T OPEN TAPE FILE FOR READ ACCESS IF DEFINE VALUE FOR USE 
IS OUT

CAN'T OPEN TAPE FILE FOR WRITE ACCESS IF DEFINE VALUE FOR USE 
IS IN

COMMAND IS NOT SUPPORTED FOR FILES ON OPTICAL DISK

COMPACT OPTION IGNORED FOR NON-RELATIVE FILES

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands