manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 76

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-24

CHECKSUM

CHECKSUM

Recomputes the checksum value for blocks of data in disk files. Use this command 
when recovering from a software-detected checksum error.

fileset-list

is a list of files whose checksum values are to be recomputed. 

fileset-list

 can 

include Enscribe files (structured or unstructured) and SQL files. You can specify 

qualified-fileset

 for 

fileset-list

.

Any SQL views (protection or shorthand) in 

fileset-list

 are ignored, and a 

warning is issued.

PARTONLY

specifies that FUP is to compute checksum values for all the primary and 
secondary partitions encountered in 

fileset-list

 and for all nonpartitioned 

files. If a primary partition name is referenced, the secondary partitions of the file 
are not checksummed.

CHECKSUM Guidelines

Although CHECKSUM reads each block of data (from each file specified by 

fileset-list

) and recomputes a checksum value for each one, it rewrites only 

blocks whose checksum values are incorrect.

Checksum errors usually indicate a potential data integrity problem. CHECKSUM 
recomputes the checksum value for blocks of data but does not fix any data that 
might have changed.

If a Peripheral Utility Program (PUP) DOWN or STOPOPENS command was 
executed for the volume named in 

fileset-list

, CHECKSUM aborts.

If an open file or SQL view is encountered during processing, CHECKSUM skips it, 
and a warning message appears.

If the 

fileset-list

 includes an asterisk (*) to specify all files in the file set, and 

if the PARTONLY option has not been specified, CHECKSUM skips secondary 
partitions of partitioned files (Enscribe and SQL).

CHECKSUM accepts SQL catalogs but not SQL views.

The maximum number of files in the 

fileset-list

 that can be checksummed at a time 

is 2,147,483,647.

CHECKSUM fileset-list [ , PARTONLY ]

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands