manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 200

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-148

RELOAD

RELOAD

Physically reorganizes a key-sequenced file or SQL object (table or index only) while 
allowing shared read and write access to the file or object.

FUP RELOAD supports key-sequenced file reorganization of volume directories, TMF-
audited files and SQL tables, and nonaudited files and SQL tables. A reload operation 
improves access time and use of space for a key-sequenced file or SQL object that 
has undergone many insertions, deletions, and updates with length changes.

FUP RELOAD supports SQL/MX ANSI names. FUP converts each ANSI name to the 
corresponding list of Guardian file name and then performs RELOAD on these files.

OUT listfile

names a file or device to receive the output of the RELOAD command. You can 
use either a standard file name or a spool DEFINE name as the OUT 

listfile

. If 

listfile

 is an existing file, FUP appends output to that file. 

filename

is the name of the key-sequenced file or SQL object (table or index only) to be 
reorganized. It can also be a secondary partition of a partitioned file. For more 
information, see 

PARTOF $volume

 on page 2-150. You cannot use wild-card 

characters or specify 

qualified-fileset

 for 

filename

.

ansiname

identifies SQL/MX ANSI name table partition or an index partition. A single quote    
( ' ) is required to precede and delimit 

ansiname

. 

Note.

FUP support for fully qualified ANSI names for the RELOAD command is applicable on 

H06.04 and subsequent RVUs.

RELOAD [ / OUT listfile / ] filename / ‘ansiname’
       [ [ NO ] DEALLOCATE   ]
       [ , NEW               ]
       [ , PARTOF $volume    ]
       [ , RATE percentage   ]
       [ , DSLACK percentage ]
       [ , ISLACK percentage ]
       [ , SHARE             ]
       [ , SLACK percentage  ]
       [ , RECLAIM           ]
       [ , COMPACT           ]

Note.

For more information about 

listfile

, see 

Specifying Files

 on page 1-8.

ansiname

 ::= {TABLE | INDEX}  

SQL-name

  PARTITION  

SQL-identifier

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands