manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 83

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-31

CONFIG[URE] Guidelines

the interval is 30 seconds for disk transfers and 10 seconds for optical 
transfers. The time you specify must be a positive number; 0 specifies the FUP 
defaults.

Because each update to the RESTART file requires a synchronized update to 
the TARGET file, smaller values can slow down a DUP[LICATE] process.

STATONLY

suppresses the implicit INFO DETAIL display if INFO STAT is specified.

XLATE xlate-table-name  [ TEXT|CHARMAP ] [ IN filename  ]

specifies the name of a translation table that FUP can use in subsequent 
COPY, LOAD, or BUILDKEYRECORDS commands when you use the XLATE, 
XLATEIN, or XLATEOUT keyword in the command.

The 

xlate-table-name

 parameter is 24 characters long and can include 

letters, numbers, underscores (_), hyphens (-), and circumflex (^) characters.

CHARMAP specifies a translation table from the CHARMAPS product (T9279). 
If CHARMAP is specified, 

filename

 defaults to 

$SYSTEM.SYSTEM.ZCHARMAP, and 

xlate-table-name

 must be one of 

the defined tables in the CHARMAP file. CHARMAP is the default.

TEXT specifies a user-created translation table. If you specify TEXT, you must 
also specify 

filename

. FUP expects the translation table to be the first 512 

bytes of an unstructured file from the first record of a structured file. If the 
record is either longer or shorter than 512 bytes, FUP issues a warning 
message.

Because FUP does not read 

filename

 until needed by a COPY, LOAD, or 

BUILDKEYRECORDS command, the CONFIGURE command does not 
provide error notification.

When used in a COPY, LOAD, or BUILDKEYRECORDS command, the 
XLATEIN and XLATEOUT options specify direction:

The XLATEOUT table is expected to be the reciprocal translation for the 
XLATEIN table. The XLATE option is the same as XLATEIN.

CONFIG[URE] Guidelines

The ALLOW, DISPLAYBITS, and REPORTWIDTH commands from the previous 
product versions of FUP are now CONFIGURE commands. However, for 
compatibility, they are also supported as separate commands.

Any values specified in the CONFIGURE command are enabled until they are 
reset (with a RESET CONFIGURE command) or until the FUP session ends. To 

XLATEIN

Specifies a translation using the first 256 bytes in the XLATE table

XLATEOUT

Specifies the second 256-byte section of the XLATE table

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands