manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 168

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-116

INFO EXTENTS Listing Format

BUFFERED
AUDITCOMPRESS
OWNER -1
SECURITY (RWEP): *SQL
DATA MODIF:  27 Oct 2005, 23:34
CREATION DATE:  16 Oct 2005, 20:31
REDEFINITION DATE:  16 Oct 2005, 20:31
LAST OPEN:  16 Nov 2005,  0:38
EOF: 12288 (0.1% USED)
EXTENTS ALLOCATED: 1
PARTITION ARRAY FORMAT2ENABLED
TOTAL     TOTAL  AVG #   AVG   AVG %
LEVEL    BLOCKS     RECS   RECS  SLACK  SLACK
1          1         1    1.0   4036     99
DATA       1        29   29.0   3580     87
FREE       0
BITMAP      1

INFO EXTENTS Listing Format

Example 2-9

 shows the format the FUP INFO command with the EXTENTS option 

uses to display file information.

INFO EXTENTS Listing Format Examples 

To show the FUP INFO, EXTENTS listing for PARTFILE (a key-sequenced, 
partitioned file):

-INFO PARTFILE,EXTENTS
$VOL1.SVOL.PARTFILE           11/03/99 14:45
      EXTENT  # OF PAGES  STARTING PAGE  PART
          0           1         12246    $VOL1
          1           1         12247

Example 2-9. INFO EXTENTS Listing Format

filename                            date-and-time
    EXTENT     # OF PAGES   STARTING PAGE [  PART  ]
    extent-num num-pages    start-page    [  name  ]

filename

Is the name of the file being listed by FUP INFO.

date-and-time

Indicates the system date and time when the listing was produced.

extent-num

Is the ordinal extent number of the entry. The first extent in a file is 
designated extent 0. If no extents are allocated, the value is NONE.

num-pages

Is the number of disk pages (2048-byte units) that compose the 
indicated extent.

start-page

Is the absolute page address of the first page of the indicated extent.

name

For partitioned files, is the partition name associated with the entry.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands