manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 117

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-65

DUP[LICATE]

If you use a wild-card character or 

qualified-fileset

 option to specify the 

name of a file in 

from-fileset-list

, you must specify the file name part of 

to-fileset

 with the (*) wild-card character.

If you specify the file name part of 

to-fileset

 as an asterisk (*), each output 

file is given the disk file name of its corresponding input file.

If you specify the subvolume of 

to-fileset

 as an asterisk (*), each output 

file is given the subvolume name of its corresponding input file.

The AUDIT options of the files in 

to-fileset

 are reset regardless of the 

state of that option for the files in 

from-fileset-list

.

RESTARTABLE [ restart-filename ]

specifies that FUP create 

restart-filename

 (as an unstructured disk file with 

file code 855). FUP maintains information in this file that describes the progress of 
the DUP operation. If a failure occurs, the RESTART command can use this 
information when continuing the operation.

restart-filename

is the name of the unstructured (informational) disk file FUP creates for the 
RESTARTABLE

 

DUP operation. The name must not be the same as any file 

name in the specified subvolume, the source file name, or the destination file 
name.

If you specify only the file name part for 

restart-filename

, the name is 

expanded using the current default names for volume and subvolume.

The restart file is not created until after the destination file is successfully created. If 

restart file-name

 

is the same as either a source file or a destination file or is 

the same as any other file name in the subvolume, FUP issues an error 10 (file 
already exists). However, if the restart file name conflicts with an existing file name 
and the source file is empty, FUP creates a destination file but does not create a 
restart file and does not issue an error 10.

The restart file is purged when a DUP operation is completed successfully. If a 
RESTARTABLE DUP[LICATE] process fails, use the FUP RESTART command to 
complete the DUP operation.

The restart file can never reside on an optical disk volume.

If you do not specify 

restart-filename

, FUP creates a file named ZZRSTART 

on your current subvolume.

If multiple RESTARTABLE DUP[LICATE] processes are running concurrently, each 
RESTARTABLE DUP[LICATE] process must use a different 

restart-filename

.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands