manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 133

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-81

HISTORY

To display the syntax of the FUP CREATE command:

-HELP CREATE
CREATE filename [ , create param ] ...
   create param                          -- see SET

To display the syntax of the FUP PURGE command:

-HELP PUR
PURGE { [ ! ] fileset [, fileset ] ... [ ! ] }
      { [ ! ] ( fileset [, fileset ] ... )
          [, [NO] LISTALL ] [ ! ]            }

HISTORY

Displays your previous FUP commands.

OUT listfile

names an existing disk file or a device to receive the listing output from the 
HISTORY command. You can use either a standard file name or a spool DEFINE 
name as the OUT file name for a HISTORY command. If 

listfile

 is an existing 

file, FUP appends the output to the file. 

num

is the number of previous commands to display.

HISTORY Guidelines

If you omit 

num

, FUP displays the last 10 commands.

If 

num

 is greater than the number of commands in the history buffer, FUP displays 

all the commands in the buffer.

The HISTORY command display shows line numbers for each command. You can 
use line numbers in the FC, !, or ? commands. Line numbers are not displayed 
anywhere else in FUP.

The HISTORY command buffer can hold from 50 through 200 commands, 
depending on the size of the commands. After the buffer becomes full, the oldest 
command is discarded, as necessary, for each new command. Discarded 
commands are not available from the HISTORY command, the ! command, or the 
? command.

HISTORY [ / OUT listfile / ] [ num ]

Note.

For more information about 

listfile

, see 

Specifying Files

 on page 1-8.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands