manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 225

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-173

SET Parameters for All File Types

specified with NO BUFFERED. The default is BUFFERED for audited files and NO 
BUFFERED for nonaudited files. 

CODE file-code

sets the file code. Specify 

file-code

 as an integer in the range 0 through 65,535. 

The default is zero. File codes 100 through 999 are reserved for use by HP. 

EXT { extent-size                           }
    { ( pri-extent-size , sec-extent-size ) }

sets the extent size—including primary and secondary extent sizes (if applicable). 
Extents should be at least as large as the block size (for structured files). If they 
are not, multiple extents are allocated every time a block is required. The extent 
size must be an integral multiple of the unstructured buffer size (for unstructured 
DP2 files).

The default value for 

extent-size 

and 

pri-extent-size 

is one page (2,048 

bytes). If you specify a value of zero or do not specify a value, 

sec-extent-size 

defaults to the 

pri-extent-size 

value. When creating files, you cannot define 

primary or secondary extents as zero pages.

For unstructured files on a disk drive in a disk drive enclosure, the 

pri-extent-

size 

and the 

sec-extent-size 

must both be divisible by 14.  DP2 

automatically rounds the size up if the file is non-partitioned.

You can specify these values for 

extent-size

,

 pri-extent-size,

 and 

sec-extent-size

:

0:maximum [ PAGE[S] ]

specifies the extent size in pages (2,048-byte units). Possible values of 

maximum

 are:

Because the minimum extent size is one page (2,048 bytes), one page is 
also allocated if you specify zero extents.

Caution.

If you use the buffered-cache option on a DP2 file that is not audited by TMF, a 

system failure or disk-process takeover can cause the loss of buffered updates to the file. An 
application program might not detect this loss (or handle the loss correctly) unless it is modified 
to do so.

Note.

For a list of the reserved file codes, see 

Table 2-2

 on page 2-90.

Format 1

Format 2

0:65,535 [ PAGE[S] ]

0:512,000,000 [ PAGE[S] ]

Note.

If you specify an extent size over 65,535 pages, you must assign Format 2 

to your files.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands