manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 264

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-12

Recovery.

Write down the complete 

description

 and contact your service provider.

Cause.

An illegal character was used in the attempted command or ANSI Name is 

entered specifying an invalid SQL identifier character.

Effect.

The command fails.

Recovery.

Retry the command after correcting the illegal character.

Cause.

The attempted command contained an illegal extent-size specification. For 

example, if the extent size was specified as RECS (records-extent) for a structured file, 
and later computation of the extent size revealed that the extent size was too large 
(greater than 64 KB), this error is returned.

Effect.

The command fails.

Recovery.

Retry the command after correcting the extent-size values.

Cause.

The file name specified in the command was not valid.

Effect.

The command fails.

Recovery.

Retry the command after correcting the file name.

Cause.

The attempted command specified an invalid key value. For example, the 

FIRST option of the COPY command specified an invalid key value for position 
purposes.

Effect.

The command fails.

Recovery.

Retry the command after correcting the key value.

Cause.

An option not allowed for the attempted command was used.

Effect.

The command fails.

Recovery.

Retry the command after correcting the option.

ILLEGAL CHARACTER

ILLEGAL EXTENT SIZE SPECIFIED

ILLEGAL FILENAME

ILLEGAL KEY VALUE

ILLEGAL OPTION

ILLEGAL QUALIFIED FILESET EXPRESSION:  specific error

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands