manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 213

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-161

RESTART Guidelines

RESTART Guidelines

FUP (DUP) updates the restart file periodically. This causes a RESTART operation 
to start from the last update, which is not necessarily from the last record written.

The RESTART operation fails if any of these conditions exist:

The last modified time of the source file has changed.

A file with the same name as 

restart-filename

 exists on the destination 

disk for the DUP operation.

FUP does not verify if the security, ownership, or other attributes of the source file 
have changed since the last modified time of the file. The file attributes appear in 
the file label of the source file.

During a RESTART operation, FUP makes additional updates to the restart file to 
record its progress. If the RESTART operation fails, a subsequent RESTART 
operation can continue from the point where the failed operation stopped.

The RESTART file is purged when the DUP[LICATE] process finishes.

The restart file created by H01 version of FUP cannot be used with H02 version of 
FUP and vice versa.

RESTART Examples

This example assumes that the DUP operation from the first command fails. The 
RESTART command restarts the DUP operation.

-DUP FILE1, FILE2, RESTARTABLE
-RESTART

If a RESTARTABLE DUP operation fails and you issue a RESTART command, 
FUP always echoes the original DUP command in uppercase.

A 

restart-filename

 is not included in the RESTARTABLE option of the DUP 

command, so FUP searches for the ZZRSTART file on the current subvolume for 
the information it needs to perform the RESTART operation.

To include a 

restart-filename

 with the RESTARTABLE DUP command:

-DUP OLDFILE, NEWFILE, RESTARTABLE RSFILE
         .
         .
-RESTART RSFILE

If the DUP operation fails, the RESTART command must specify the name of the 
RSFILE to request FUP to use the information contained in the unstructured file 
(file code 855) RSFILE for the RESTART operation.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands