manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 188

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-136

LOAD Guidelines

The FUP LOAD command reads the source file directly using large buffers unless 
you specify SHARE, in which case the Enscribe file system performs the reads.

You can use a SORT DEFINE with the LOAD command. You must define it before 
starting FUP. For more information, see the 

FastSort Manual

.

For key-sequenced files, you can specify the percentage of slack space you want 
to keep for future insertions.

If you specify the PARTOF option when loading a file that is not partitioned, you 
receive one of these error messages:

File-system error 11 (file not in directory) if the primary partition specified with 
PARTOF does not exist

The message BAD PARTITION PARAMETERS if the primary partition 
specified with PARTOF is not a partitioned file—or is not a partition of the file 
being loaded

Before you load partitioned files, consider these restrictions:

The range of keys for the different partitions is stored in the primary partition of 
a partitioned file.

If you try to load a secondary partition but you did not specify the PARTOF 
option, you receive an error message.

The FUP process loads all partitions if you do not specify PARTOF, and 

destination-filename

 is the primary partition.

To load a secondary partition, specify the name of the secondary partition as 

destination-filename,

 and specify the name of the volume where the 

primary partition resides (for the PARTOF option).

To load only the primary partition, specify the name of the primary partition as 

destination-filename

, and specify the name of the primary volume for 

the PARTOF option.

To sort the 

in-filename

 records, you must have both disk space for the sort 

scratch file and for 

destination-filename

 during the sorting phase.

Use the PAD and TRIM options carefully in a FUP LOAD or COPY operation.

An example of this situation occurs if you pad each record in a data file with zeros 
to a standard size in bytes and then store the records in another file. If you trim the 
trailing zeros when you execute a FUP LOAD or COPY of the stored records, any 
original data that ends with a zero is trimmed. To avoid this problem, use a value 
for 

pad-character 

or 

trim-character

 that is not contained in your data.

Note.

For more information about error messages, see 

Section 3, FUP Messages

.

Caution.

If your data contains 

trim-character

 or 

pad-character

, data might be altered 

or lost.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands