manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 287

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-35

Recovery.

None.

Cause.

ANSI Name is entered with TABLE or INDEX in the RELOAD command.

Effect.

The command fails.

Recovery.

None.

Cause.

Returned when FUP tries to launch one more ANSI Name Server Process 

(ANSP) when it already has one active ANSP.

Effect.

The command fails.

Recovery.

This message should never appear. If it does, stop FUP and start it again 

and then issue the command.

Cause.

ANSI Name entered does not exist on the system or is inaccessible.

Effect.

The command fails.

Recovery.

Check whether the input ANSI Name really exists in the system or not and 

then retry the command with the correct ANSI Name..

Cause.

ANSI Name is encountered after the Guardian name in any command 

supporting ANSI Names or in any command that does not support ANSI Names.

Effect.

The command fails.

Recovery.

Retry the command by entering either the ANSI Name or the Guardian 

name.

Cause.

Returned by FUP when an internal error occurs in the ANSI Name Server 

Process (ANSP) due to a memory allocation failure.

Effect.

The command fails.

Recovery.

For corrective actions, contact the SQL/MX ANSI Names developers.

COMMAND ONLY SUPPORTS TABLE PARTITION and INDEX PARTITION

DUPLICATE REQUEST, AN ANSP WAS ACTIVE

<SQL/MX ANSI Name> DOES NOT EXIST OR IS INACCESSIBLE

GUARDIAN FILE NAME EXPECTED

INTERNAL ERROR OCCURED IN ANSP DUE TO MEMORY ALLOCATION 
FAILURE

REQUIRED SINGLE QUOTE MISSING; ANSI NAME EXPECTED

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands