manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 265

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-13

Cause.

A syntax error occurred in the qualified file-set expression. The additional text 

should describe the specific error.

Effect.

The command fails.

Recovery.

Retry the command after correcting the syntax.

Cause.

A syntax error occurred in the attempted command.

Effect.

The command fails.

Recovery.

Retry the command after correcting the syntax.

Cause.

The attempted command specified an illegal value: for example, SET EXT -1.

Effect.

The command fails.

Recovery.

Retry the command after correcting the value.

Cause.

An attempt was made to create a DP2 key-sequenced file with the index block 

size and data block size set to different values.

Effect.

The CREATE command finishes, but the IBLOCK value for the file is set to its 

BLOCK value.

Recovery.

If the modified IBLOCK value is not the value required, reset the BLOCK 

and IBLOCK values, and retry the command. The index block size must equal the data 
block size for DP2 key-sequenced files.

Cause.

An attempt was made to execute a command reserved for the super ID 

(255,255).

Effect.

The command fails.

Recovery.

Only the super ID can use the attempted command.

Cause.

An internal program error occurred.

Effect.

The command fails.

ILLEGAL SYNTAX

ILLEGAL VALUE

INDEX BLOCK SIZE SET EQUAL TO DATA BLOCK SIZE

INSUFFICIENT CAPABILITY

INTERNAL LOAD ERROR:  nnn

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands