manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 233

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-181

SET Parameters for Files With Alternate-Key Fields

ALTFILE ( key-file-number, filename )

adds or replaces the file name of an alternate-key file. You must include this 
parameter for any undefined key file number that is referenced by an ALTKEY 
specification. Specify 

key-file-number

 as an integer sequentially in the range 0 

through 255 to designate the alternate-key file being named.

The FUP process expands a partial file name by adding the current default names 
for node, volume, and subvolume.

If you add a new ALTFILE number, your SET command must also include an 
ALTKEY option that specifies the alternate-key file.

If you are defining a new alternate-key file, you must create the file in a separate 
operation either before or after using SET ALTFILE.

If you are deleting the last alternate-key specification, you must also delete the 
corresponding alternate-file specification in the same SET command.

If you are deleting the last alternate-file specification, you must also delete the 
corresponding alternate-key specification in the same SET command.

ALTKEY ( key-specifier { , altkey-param }... )

sets an alternate-key specification. You must specify each alternate key separately.

key-specifier

is a 2-byte value that identifies this alternate-key field. Specify 

key-specifier

 as either a one-character or two-character string in quotation 

marks:

"[c1]c2"

Or specify it as an integer from -32,768 through 32,767:

{ -32,768 : 32,767 }

You can use any characters for 

key-specifier

 except zero. If you omit 

c1

, 

then 

c1

 is treated as a zero.   

altkey-param

specifies attributes of the alternate-key file.

FILE key-file-number

sets the key-file number for 

key-specifier

. Specify 

key-file-number

 

as an integer from 0 through 255. ALTFILE 

create-param

 relates this 

number to an actual file. The default is zero.

Note.

If you add a new key specifier that references an undefined key-file number, 

you must include the ALTFILE option to define the alternate-key file.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands