manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 58

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-6

Commands Related to ?

Commands Related to ?  

ALLOCATE

Allocates file extents for a disk file. This command applies only to Enscribe files.

fileset-list

is a list of disk files for which extents are to be allocated. You can specify 

qualified-fileset

 for this 

fileset-list

.

num-extents

is the total number of extents to be allocated to the file.

For nonpartitioned Disk Process 2 (DP2) files and key-sequenced partitioned files, 
specify 

num-extents

 as a value from 1 through 

maximum-extents

. 

maximum-extents

 is the number of extents set with the MAXEXTENTS file 

attribute when the file was created or last altered. The default value for 

maximum-extents

 is 16. For more information, see 

SET

 on page 2-171.

For partitioned files that are not key-sequenced, specify 

num-extents

 as a value 

from 1 through 16 multiplied by the number of partitions. Each partition is allocated 
16 extents (beginning with the start of the file) until the total 

num-extents

 are 

allocated. 

PARTONLY

allocates extents to any primary and secondary partitions of partitioned files in 

fileset-list

. If a primary partition name is referenced, the extents are 

allocated only to the primary partition. If you omit PARTONLY, FUP allocates 
extents to all the partitioned files in 

fileset-list

. PARTONLY has no effect on 

nonpartitioned files.

ALLOCATE Guidelines

num-extents

 has a different significance for different file types. For 

key-sequenced partition files, it is the number of extents allocated in each partition. 

COMMAND

Function

Page

HISTORY

Displays previous FUP commands

2-81

FC

Modifies a previous FUP command

2-73

!

Reexecutes a previous FUP command

2-4

ALLOCATE fileset-list , num-extents [ , PARTONLY ]

Note.

Extents 0 through 15 are in partition zero, extents 16 through 31 are in partition one, 

extents 32 through 47 are in partition two, and so on.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands