manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 120

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-68

DUP[LICATE]

If you omit PARTONLY and define a primary partition in 

from-fileset-list

, 

FUP duplicates the entire partitioned file (all partitions). If PARTONLY is not 
specified, it is an error to specify a secondary partition in 

from-fileset

.

PHYSVOL [  physvol ]

specifies the physical volume where a file should be created. This option overrides 
any SMF parameters after the CREATE command creates a file on the virtual disk. 
The specified 

physvol

 must be included in the storage pool associated with the 

SMF virtual disk process.

SAVEALL

transfers the owner ID, security, and last modified timestamp of the files in 

from-fileset-list

 to 

to-fileset

 unchanged. If you omit SAVEALL, 

SAVEID, and SOURCEDATE, FUP sets the owner ID and default security of the 
user who is executing the DUP command (the user ID that you used for the current 
session) and sets the timestamp to the time the DUP[LICATE] process completes.

The SAVEALL option is equivalent to the SAVEID and SOURCEDATE options.

FUP uses only one of these options: SAVEALL, SAVEID, or SOURCEDATE. If 
more than one is specified, FUP uses the last one specified. 

SAVEID

transfers the owner ID and security of the files named in 

from-fileset-list

 to 

to-fileset

 with no changes. If you omit SAVEID and SAVEALL, FUP sets the 

owner ID and default security to that of the user executing the DUP[LICATE] 
command (the user ID that you used for the current session).

FUP uses only one of these options: SAVEALL, SAVEID, or SOURCEDATE. If 
more than one is specified, FUP uses the last one specified.

SOURCEDATE

transfers the last modified timestamp of the files in 

from-fileset-list

 to 

to-fileset

 unchanged. If you omit SOURCEDATE and SAVEALL, FUP sets the 

timestamp to the time the DUP[LICATE] process completes.

FUP uses only one of these options: SAVEALL, SAVEID, or SOURCEDATE. If 
more than one is specified, FUP uses the last one specified.

Note.

For more information about the SAVEALL option, see 

DUP[LICATE] General 

Guidelines

 on page 2-69.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands