manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 266

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-14

Recovery.

Note the internal load error indicated by 

nnn

, and contact your service 

provider.

Cause.

A RELOAD, STATUS, or SUSPEND command received an invalid SPI 

message from the reload server process.

Effect.

The command fails.

Recovery.

This is an internal error. Contact your service provider.

Cause.

The reload server process returned invalid status information to a STATUS 

command.

Effect.

The command fails.

Recovery.

This is an internal error. Contact your service provider.

Cause.

During execution of a DUP command with the KEEP option specified, the file 

indicated by 

filename

 was not duplicated.

Effect.

None.

Recovery.

Informational message only, indicating successful completion for all or 

some of the specified files.

Cause.

An attempt to create a file failed because the key length specified for the 

primary key was not specified or was specified as zero.

Effect.

The CREATE or ALTER command fails.

Recovery.

Retry the command with a legal KEYLEN value.

Cause.

An attempt to create a key-sequenced partitioned file failed because a partial 

key was not specified for a secondary partition.

Effect.

The CREATE command fails.

Recovery.

Retry the command after correcting the PART definition.

INVALID SPI MESSAGE RETURNED BY SERVER

INVALID STATUS RETURNED BY SERVER

filename : KEPT

KEY LENGTH MUST BE NONZERO

KEY SEQUENCED FILE PARTITION MUST HAVE A PARTIAL KEY

KEYTAG NOT DEFINED FOR FILE

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands