manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 258

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-6

Recovery.

Informational message; no corrective action is needed.

Cause.

A check was made of some internal structures.

Effect.

The command might not finish.

Recovery.

This message should never appear. If it does, contact your service 

provider.

Cause.

A logical style DEFINE name was specified for a DEFINE class, such as class 

SPOOL or class TAPE, that does not exist.

Effect.

The command fails.

Recovery.

Specify a correct name and retry the command.

Cause.

When an attempt was made to use FUP ALTER 

filename

, NO AUDIT, FUP 

encountered a “file is bad” error (CRASHOPEN flag is on). 

filename

 was partitioned.

Effect.

The command is not executed.

Recovery.

Reissue the FUP ALTER command for each partition.

Cause.

A file-system error occurred while you tried a CREATE command with the 

indicated file.

Effect.

The command fails.

Recovery.

For corrective action for the file-system error number indicated by 

nnn

, see 

the 

Guardian Procedure Errors and Messages Manual

.

Cause.

A file name was entered with the volume name specified and the subvolume 

name unspecified. In later RVUs, you are required to specify the subvolume name 
when you specify the volume name in a command. 

Effect.

Processing continues. 

CONSISTENCY CHECK

COULD NOT FIND DEFINE.

CRASH OPEN FLAG ON.  MUST ALTER PARTITIONS INDIVIDUALLY (I.E. 
PARTONLY)

filename : CREATE ERR : nnn

filename: DEFAULTED SUBVOLUME WILL NOT BE SUPPORTED IN THE 
FUTURE

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands