manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 275

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-23

Recovery.

If the error is not apparent, try using INFO on a file with a similar file set 

without using a qualified file set.

Cause.

Qualified file set is either not permitted in this command, or it was used in an 

incorrect position.

Effect.

The command fails.

Recovery.

Use the qualified file set in the correct position, or retry the command 

without a qualified file set (if they are not permitted in this command).

Cause.

In the primary file, 

nnn

 records had partial alternate-key fields. The actual 

record did not contain the full length of the alternate key. The corresponding alternate-
key records were not generated in the destination file by LOADALTFILE or 
BUILDKEYRECORDS.

Effect.

The LOADALTFILE or BUILDKEYRECORDS command finishes, but no 

alternate-key records are generated for the records with partial alternate keys. This is 
only a warning.

Recovery.

Retry the command after padding the records in the primary file so that 

alternate keys are always completely contained in the records.

Cause.

A FUP command was entered that attempted to assign a record size 

inappropriate for the file format of the file.

Effect.

The command fails.

Recovery.

Reenter the command with an appropriate record size. For a list of 

appropriate record sizes, see 

Table 1-1, File Format Codes,

 on page 1-23.

Cause.

A LOAD command was issued.

Effect.

The operation completes, and 

nn

 indicates the number of records actually 

loaded. If the EMPTYOK option was used to load an empty source file, 

nn

 is 0.

Recovery.

Informational message only; no corrective action is needed.

QUALIFIED FILESETS NOT PERMITTED

nnn RECORDS CONTAIN INCOMPLETE ALTERNATE KEY FIELDS 
(ALTERNATE KEY RECORDS NOT GENERATED)

RECORD SIZE EXCEEDS THE APPLICABLE LIMIT.  FORMAT 2 DOES NOT 
ALLOW AS BIG A RECORD AS FORMAT 1 FOR SAME BLOCK SIZE

RECORDS LOADED:  nn

REELS PARAMETER NOT ALLOWED FOR LABELED TAPES

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands