HP G08 Reference Manual Download Page 96

Page: 96 / 326

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-44

COPY: Copy Form

SKIPIN num-eofs

moves the tape past

num-eofs

end-of-file (EOF) marks before the data

transfer begins (for magnetic tape only). You cannot specify this option if

in-filename

is a tape DEFINE with LABELS set for labeled tape processing.

You must use the appropriate tape DEFINE attribute to skip files on a labeled
tape.

If you include the SKIPIN option (and

in-filename

is a tape DEFINE), FUP

displays this error message:

ERROR - SKIPIN PARAMETER NOT ALLOWED FOR
LABELED TAPES

Specify

num-eofs

as an integer in the range -255 through 255.



If you specify a positive value, the tape is forwarded past

num-eofs

EOF

marks and positioned immediately after the last EOF mark passed.



If you specify a negative value, the tape is rewound over

num-eofs

EOF

marks (-1 multiplied by

num-eofs

) and then moved forward and

positioned immediately ahead of the last EOF mark passed.



If you specify a value of zero, the SKIPIN option is ignored.



If you omit the SKIPIN option, the tape remains at its current position, and
the data transfer begins with the next physical record on tape.

TRIM [ trim-character ]

deletes any trailing characters matching

trim-character

. Specify

trim-character

as either a single ASCII character in quotation marks:

"c"

Or specify it as an integer in the range 0 through 255 that specifies a byte
value:

{ 0:255 }

[ NO ] UNLOADIN

specifies whether the tape is unloaded after it is rewound (for magnetic tape
only). The default is UNLOADIN. (The tape is unloaded after it is rewound.)
This option also applies to labeled tapes.

VARIN

reads variable-length, blocked records. These records can be produced using
the COPY command option

VAROUT

on page 2-49.

Note.

For more information, see the

Guardian User’s Guide .

Note.

The

trim-character

default is an ASCII null character (binary 0).

Summary of Contents for G08







































































































































































































































































































































Search results

Summary of Contents for G08

Reviews:

Brands by name

Popular brands

HP G08, Reference Manual

Search results

Summary of Contents for G08

Reviews:

Brands by name

Popular brands