manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 62

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-10

ALTER Parameters for All File Types

For files with alternate-key fields:

ALTFILE ( key-file-number , filename )
ALTKEY ( key-specifier { , altkey-param }... )
DELALTFILE key-file-number
DELALTKEY key-specifier

For partitioned files:

PART ( sec-partition-num ,
     [ \node.]$volume
     [ , pri-extent-size [ , sec-extent-size ]] )
PARTONLY

For unstructured files:

BUFFERSIZE unstructured-buffer-size
ODDUNSTR

ALTER Parameters for All File Types

These 

alter-option

 parameters are available for all file types:

[ NO ] AUDIT

designates the file as audited or nonaudited by TMF. If you specify AUDIT, FUP 
marks the file as an audited file. If you specify NO AUDIT, FUP marks the file as a 
nonaudited file. To use the AUDIT option, you must have read and write access to 
a file (or be the super ID 255,255). 

[ NO ] AUDITCOMPRESS

sets the mode of producing audit-checkpoint messages (using compressed or 
entire messages) for audited files. The default is NO AUDITCOMPRESS.

[ NO ] BUFFERED

sets the mode of handling write requests to the file using buffered or write-through 
cache. BUFFERED specifies a buffered cache. NO BUFFERED specifies a write-
through cache. The default is BUFFERED for audited files and NO BUFFERED for 
nonaudited files.  

Note.

For more information, see the 

TMF Planning and Configuration Guide.

Caution.

If you use the buffered-cache option on a DP2 file that TMF does not audit, a system 

failure or disk-process takeover can cause the loss of buffered updates to the file. An 
application might not detect this loss, or handle the loss correctly unless it is modified to do so.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands