manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 79

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-27

CONFIG[URE]

DUP[LICATE] dup-option [, dup-option ]...

specifies any of the DUP[LICATE] options (except SOURCE or TARGET file 
names); for example, PURGE, SOURCEDATE. By default, no DUP[LICATE] 
options are configured. For more information, see 

DUP[LICATE]

 on page 2-64.

LOAD load-option [, load-option ]...

specifies any LOAD option (except SOURCE or TARGET file names); for 
example, SLACK 20. By default, no LOAD options are configured. For more 
information, see 

LOAD

 on page 2-131.

LOADALTFILE loadaltfile-option [, loadaltfile-option ]...

specifies any of the LOADALTFILE options (except 

key-file-number

 and 

primary-filename

); for example, MAX 999, SLACK 50. By default, no 

LOADALTFILE options are configured. For more information, see 

LOADALTFILE

 on page 2-138.

RELOAD reload-option [, reload-option ]...

specifies any of the RELOAD options (except 

filename

); for example, NEW, 

DSLACK 60. By default, no RELOAD options are configured. For more 
information, see 

RELOAD

 on page 2-148.

RELOCATE SOURCEDATE

By default, no RELOCATE options are configured. For more information, see  

RELOCATE

 on page 2-154.

ALLOW allow-option [, allow-option ]...

specifies the number of errors FUP permits while processing commands. The 
default is zero errors. (This option replaces the FUP command 

ALLOW

 on 

page 2-9.)

allow-option

 is:

   { num } [ [SEVERE ] ERRORS ]
   { num } [ WARNINGS         ]
   [ ABENDS [ ON | OFF ]      ]

num

is the maximum number of errors or warnings that can occur before a 
FUP command is aborted. The default ALLOW count is 0 for severe 
and nonsevere errors; it is unlimited for warnings. The allowable range 
for errors is 0 through 32767. FUP keeps an error count internally for 
both severe and nonsevere errors.

num ERRORS

sets the nonsevere error count to 

num

.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands