manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 20

About This Manual

File Utility Program (FUP) Reference Manual—523323-014

xiv

Additional Information

Additional Information

For more information about FUP and its associated components, see:

Notation Conventions

Hypertext Links

Blue underline is used to indicate a hypertext link within text. By clicking a passage of 
text with a blue underline, you are taken to the location described. For example:

This requirement is described under 

Backup DAM Volumes and Physical Disk 

Drives

 on page 3-2.

General Syntax Notation

This list summarizes the notation conventions for syntax presentation in this manual.

Manual

Description

5200 Optical Storage Facility 
(OSF) Reference Manual

 

Describes the FUP commands that require special 
considerations when used with the 5200 OSF (for D-
series RVUs only)

Enscribe Programmer’s Guide

 

Provides descriptions of structured disk files and the file 
attributes specified in FUP commands.

File Utility Program (FUP) 
Management Programming 
Manual

 

Explains how to execute commands from within an 
application program by using the Subsystem 
Programmatic Interface (SPI).

Guardian Disk and Tape 
Utilities Reference Manual

 

Explains tape handling procedures and describes the 
BACKCOPY, BACKUP, DCOM, DSAP, RESTORE, and 
TAPECOM utilities.

Guardian Procedure Errors 
and Messages Manual

Describes any file-system (or other) errors referenced by 
number in the FUP error messages.

Guardian User’s Guide 

Provides task-oriented instructions for using FUP and 
DEFINEs. It also includes a basic FUP introduction.

SQL/MP Reference Manual

 

Describes the SQLCI commands used on SQL files. 
Because this function is similar to the FUP process, this 
manual also describes using FUP at the SQLCI prompt.

SQL/MX Reference Manual 

Describes the syntax of SQL language elements. 

Safeguard User’s Guide

 

Describes the basic security tasks that FUP requires.

TACL Reference Manual

Describes the RUN command options and all the other 
TACL commands and functions.

SQL/MX Glossary

Describes terms specific to SQL/MX.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands