manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 105

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-53

COPY: Copy Form Guidelines

The [NO] COMPACT option affects copy operations for relative IN files only. If you 
specify NO COMPACT when you are copying another type of file, this message 
appears:

WARNING - COMPACT OPTION IGNORED FOR NONRELATIVE FILES

If the AUDIT option is set for 

out-filename

, the copy request fails with file-

system error 75 (requesting process has no current process transaction identifier).

Be careful when using the PAD and TRIM options in a FUP COPY or LOAD 
operation. If it contains 

trim-character

 

or 

pad-character

, data can be 

altered or lost.

If you pad each record in a data file with zeros to a standard size in bytes, store the 
records in another file, then trim the trailing zeros when you FUP COPY or LOAD 
the stored records. Any original data ending with zero is also trimmed.

To avoid this problem, use a 

pad-character

 or 

trim-character

 that is not 

contained in your data.

If you enter the DENSITYOUT parameter for a tape drive that is not a model 5106 
or 5130, the COPY command continues without setting the tape density, and this 
message appears on the home terminal of the FUP process:

WARNING -filename: DRIVE DOES NOT SUPPORT DENSITY
                   SELECTION

If you enter the TAPEMODE parameter to a tape drive that does not support the 
setting, this warning message appears on your terminal, and the COPY operation 
continues without trying to set the tape mode:

WARNING - filename: DRIVE DOES NOT SUPPORT TAPEMODE
                    SELECTION

The COPY command cannot copy SQL files that are not SQL object files. You 
must use SQLCI COPY instead.

In a COPY command, you can specify both 

in-filename

 and 

destination-

filename

 as an enhanced key-sequenced file or legacy key-sequenced file.

If the 

in-filename

 is a legacy key-sequenced file and 

destination-

filename

 is an enhanced key-sequenced file, the data is copied into the 

destination file starting from the first secondary partition.

If the 

in-filename

 is an enhanced key-sequenced file and 

destination-

filename

 is a legacy key-sequenced file, the data in the source file starting from 

the first secondary partition is copied into the destination file starting from the 
primary partition.

You can use the 

unstructured

 option to copy the data into individual partitions of 

an enhanced key-sequenced file. If the source file is a primary partition of an 
enhanced key-sequenced file and the 

unstructured

 option is used, the COPY 

command is executed but the metadata in the primary partition is not copied.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands