manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 259

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-7

Recovery.

Informational message only; no corrective action is needed.

Cause.

An attempt to open a labeled-tape file failed with file-system error 196 (tape 

label record missing or incorrect).

Effect.

The command fails.

Recovery.

Verify that the specified DEFINE attributes match the label for the tape file. 

Correct, if necessary, and retry the command. If the command fails again, for file-
system error 196 corrective action, see the 

Guardian Procedure Errors and Messages 

Manual

.

Cause.

An internal error occurred while the system was processing DEFINEs.

Effect.

The command fails.

Recovery.

Note the error indicated by 

nnn

 and contact your service provider.

Cause.

A RESTART operation was attempted, but the destination file was not corrupt, 

which implies that the previous attempt to use DUP was successful.

Effect.

The RESTART operation terminates.

Recovery.

If you need to run DUP, perform an ordinary DUP operation.

Cause.

The DP2 lock tables changed during the current LISTLOCK operation.

Effect.

All lock information already displayed for 

filename

 is invalid.

FUP automatically starts over, retrieving and displaying current lock information for the 
file identified by 

filename

 in the error message.

Recovery.

Informative message only; no corrective action is needed.

Cause.

The DP2 lock tables changed more than three times while FUP was 

attempting to retrieve and display lock information for the 

filename

 identified in the 

error message.

Effect.

An error is generated, and the LISTLOCKS operation fails.

DEFINE DOES NOT MATCH TAPE LABEL OR TAPE LABEL IS BAD

DEFINE PROCESSING ERROR:  nnn

DESTINATION FILE IS NOT FROM INTERRUPTED DUP

filename : DP2 LOCK TABLES !CHANGES: STARTING AGAIN

filename : DP2 LOCK TABLES CHANGING TOO FAST

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands